Vega 400G & Vega400G V2

If MRD Private wires are handled by Vega 400G Private wires Gateway, the following setting must be activated on the TPO cluster settings:

Location: TPO Shared Settings, TPO Private Settings, TPO Boot Settings
Global	IPT Private wire gateway compatible truefalse Key: application.gateway.iptpw.enable Description: This parameter enables the compatibility to Vega 400 gateway in order to handle TDM MRD lines and for SBCs to handle SIP Private wire MRD configuration. Warning: TPO can not use Vega/SIP PW and Aculab gateway in the same time.

Warning:  On Demand  DDI slot property is not supported.

There are three steps to configure the Vega 400G gateway:

1.IP Configuration

2.Loading Pre-Configuration file

3.Customizing the gateway

Note: The administrator must verify the IPTrade compatible check list to ensure that the configuration of the gateway will work as expected.