Configure

This section discusses how IT must proceed to configure a DDI sharing slot in order to handle a Private Wire (MRD or ARD).

Prerequisites

IP Trade components

•TSS 10.1, TPO 10.1 are installed and fully functional.

•Operator has basic understanding of concepts of DDI sharing line and Private Wires

Provider of financial circuits

•In case of MRD Private Wire usage, TDM circuits must comply with MRD (or PWA) signaling protocol

Network infrastructure

•IP connectivity must be provided between all IPTrade components

•Proper network bandwidth and speed must be provisioned to enable voice traffic between IPTrade components

•In case of ARD Private Wire usage, a valid extension/device must be provisioned in the PBX

Overview

Here is an overview of involved components. Click a component to access corresponding installation or configuration topic.