Syslogs

XMA disposes of its own tracing system and can send the logs it produces to the syslog server.

To enable the XMA syslogs:

1.Connect to the TSS Administration Console

2.Go to turret boot settings (zone or specific device)

3.Select the Advanced Mode tab

4.Add the following key:

a.application.mm.syslog = true

b.application.mm.verbose = true

c.application.XMA.syslogaccess = true

d.application.xma.loglevel = verbose

5.Reboot the Turret

IMPORTANT:

remove these settings once the issue has been reproduced and the Syslogs retrieved to avoid flooding the system with logs

The XMA Syslogs will be sent with the Turret ID and can be retrieved on the TSS Syslog server, see Turret Syslogs for details.