Configuration

First of all you need to properly cable the device

WPTT Base

Base must be plugged in one device USB port and remain plugged all the time.

WPTT Hand Device

Hand Device is only plugged for pairing purpose and remain unplugged most of the time.

It's mandatory to Connect Hand Device using IP Trade WPTT certified USB cable that has been provided with your WPTT device.

WPTT configuration keys must be set in turret Boot Settings

Location: Terminal Boot Settings
Devices	Wireless PTT device auto-reset truefalse Key: application.global.wptt.unplug.auto.reset Description: Indicates if Wireless PTT device is automatically reset when it's unplugged true: embedded software automatically reset wireless device when it's unplugged, that means IP Trade application doesn't need to reset the device after pairing but only request the user to unplug the device in order to validate changes false: embedded software doesn't automatically reset wireless device when it's unplugged, that means IP Trade application need to include a device reset in pairing procedure in order to validate paring changes. Constraint: true|false Related settings: Wireless PTT Reset Delay (application.global.wptt.reset.delay) Wireless PTT device (application.global.wptt.start)

Location: Terminal Boot Settings
Devices	Wireless PTT Permanent Pairing truefalse Key: application.global.wptt.permanent.pairing Description: Defines if wireless PTT device pairing procedure writes pairing information in non-volatile device memory true: pairing data is written in non-volatile device memory, even after device runs out of power, the pairing information are maintained and thus no pairing is required anymore when device is powered afresh. false: pairing data is written in volatile device memory, even after device runs out of power, the pairing information are lost and thus a pairing renewal is required when device is powered afresh. Constraint: true|false Related settings: Wireless PTT device (application.global.wptt.start)

Location: Terminal Boot Settings
Devices	Wireless PTT Reset Delay Key: application.global.wptt.reset.delay Description: Defines, in seconds delay to apply when requesting a device reset at the end of pairing procedure Constraint: true|false Related settings: Wireless PTT device auto-reset (application.global.wptt.unplug.auto.reset) Wireless PTT device (application.global.wptt.start)

Location: Terminal Boot Settings
Devices	Wireless PTT device truefalse Key: application.global.wptt.start Description: Activate wireless PTT device management That makes the system to listen for USB device activity (plug/unplug) When wireless PTT device is detected, systems manage device pairing. Constraint: true|false Related settings: Wireless PTT device auto-reset (application.global.wptt.unplug.auto.reset) Wireless PTT Permanent Pairing (application.global.wptt.permanent.pairing) Wireless PTT Reset Delay (application.global.wptt.reset.delay)

WPTT scancode mapping

These settings must be set for linking the WPTT to the speak action :

- profile.setting.keyboard.scancode.ctrl.26 = speakon

- profile.setting.keyboard.scancode.ctrl.27 = speakoff

Warning : To use the Wireless Push-to-talk, the setting profile.setting.keyboard.external.enabled MUST be set to true.