Several Clusters

The customer needs several TPO clusters. We describe the necessary configuration for the following example:

•TPO cluster1:

Active node 10.12.1.142

Passive node 10.12.1.143

Passive node 10.10.6.144

DNS name TPOtest01.iptrdtest.local

•TPO cluster2:

Active node 10.12.1.150

Passive node 10.12.1.151

Passive node 10.10.6.152

DNS name TPOtest02.iptrdtest.local

•Main DNS Server: 10.12.1.220

Step 1 - Turret configuration

Follow the instruction of Turret Configuration.

The turret will automatically resolve the DNS name by using the DNS server of the host machine.

Note: If the DNS server of the host machine is different of the main DNS server, the administrator must  manually fill it.

1. Go to TSS management console and go to Boot Settings (Turrets) [System, Zone or Device]

2. Click on SIP panel and select Expert Tab

3. Fill the DNS List with the Main DNS Server 10.12.1.220

Step 2 - TPO configuration

Follow the instruction of TPO Cluster DNS configuration for setup TPO cluster1 and TPO cluster2 with the appropriate DNS names

TPOtest01.iptrdtest.local and TPOtest02.iptrdtest.local.

Step 3 - IP-PBX configuration

The IP-PBX must use the Main DNS Server, follow the instruction IP-PBX DNS configuration and fill "SIP DNS1 IP address"  with 10.12.1.220

Step 4 - Main DNS Server configuration

Follow the instruction Delegation Zone management to create 2 delegations zones:

•TPOtest01 which is managed by the Mini DNS Servers 10.12.1.142, 10.12.1.143 and 10.10.6.144

•TPOtest02 which is managed by by the Mini DNS Servers 10.12.1.150, 10.12.1.151 and 10.10.6.152