Settings

Here is a list of optional settings useful to configure turret behavior.

Location: Terminal Boot Settings

TPO

Use Radio Tone	truefalse
Key: application.radio.tone.load Description: Defines if radio tones are supported - true: radio related tones are loaded at application start-up in order to make them available when user uses DDI Radio slots - false: radio related tones are not loaded and cannot be played even if DDI Radio Slots are used. Constraint: true\|false Related settings: Radio beforehand countdown audio notification (profile.radio.beforehand.countdown.notif) Outgoing radio beforehand countdown audio notification (profile.radio.outgoing.beforehand.countdown.notif) Clear Play Bong Radio Tone (application.radio.tone.clear.play.bong) Use Radio Emergency Tone (application.radio.tone.emergency)

Location: Terminal Boot Settings

TPO

Use Radio Emergency Tone	truefalse
Key: application.radio.tone.emergency Description: Defines if the radio emergency dedicated tone is played, as soon as the radio line switches to incoming state. true: the dedicated tone is used. false: the incoming tone is used. Constraint: true\|false Related settings: Use Radio Tone (application.radio.tone.load)

Location: Terminal Boot Settings

TPO

Clear Play Bong Radio Tone	NeverOn ClearOn No Call Setup
Key: application.radio.tone.clear.play.bong Description: Defines when to play Bong Radio Tone in clear/no call setup context "Use Radio Tone" must be activated in order to make this setting works properly - Never: Bong is played neither when user presses clear button nor when radio call state goes to NO_CALL_SETUP - On Clear: Bong is played when user presses clear button. - On No Call Setup: Bong is played when radio call state goes to NO_CALL_SETUP. Constraint: Never\|On Clear\|On No Call Setup Related settings: Use Radio Tone (application.radio.tone.load) Radio beforehand countdown audio notification (profile.radio.beforehand.countdown.notif)

Location: Terminal Boot Settings, Terminal Profile Settings

DDI - Sharing

Radio Busy timer
Key: profile.setting.ddiradio.busy.timer Description: Defines the countdown displayed when call state goes from NO_CALL_SETUP to a non emergency state Constraint: Numerical value, in seconds. Disabling the setting turns off the countdown. Related settings: Radio outgoing timer (profile.setting.ddiradio.outgoing.timer) Include handsets calls when clearing radio resources (profile.setting.ddiradio.clearhscalls)

Location: Terminal Boot Settings, Terminal Profile Settings

DDI - Sharing

Radio Emergency timer
Key: profile.setting.ddiradio.emergency.timer Description: Defines the time delay before automatically disengaging the emergency state on the radio channel. Only applied when the emergency state was activated by the user himself. Constraint: Numerical value, in seconds. Disabling the setting turns off the automatic emergency timer. Related settings: Radio outgoing timer (profile.setting.ddiradio.outgoing.timer) Include handsets calls when clearing radio resources (profile.setting.ddiradio.clearhscalls)

Location: Terminal Boot Settings, Terminal Profile Settings

DDI - Sharing

Radio outgoing timer
Key: profile.setting.ddiradio.outgoing.timer Description: Defines the countdown displayed when user make an outgoing radio call. Constraint: Numerical value, in seconds. Disabling the setting turns off the countdown. Related settings: Outgoing radio beforehand countdown audio notification (profile.radio.outgoing.beforehand.countdown.notif) Radio Emergency timer (profile.setting.ddiradio.emergency.timer) Radio Busy timer (profile.setting.ddiradio.busy.timer)

The LDAP search (disabled by default) is enabled with the following setting:

Location: Terminal Boot Settings, Terminal Profile Settings

Search

On the fly LDAP search	truefalse
Key: profile.setting.otf.ldap.search Description: Defines if system uses LDAP search to identify inbound call remote party When an inbound call reaches the terminal with a remote party that doesn't match any contact or extension shortcut, the system automatically launches an LDAP search based on remote party phone number. Results of such searches are temporarily stored in a particular dedicated shortcut group. That group has read only access right but shortcuts it contains can easily be copied to another shortcut group. All shortcuts stored in that group are destroyed when user logs out. Remark: feature is automatically disabled if user hasn't the corporate directory search license authorization Constraint: true\|false Related settings: Authorize corporate search (profile.setting.authorizecorporate) LDAP Access Time (directory.ldap.access.time) LDAP On The Fly Prefix (profile.setting.ldap.otf.prefix) LDAP On the fly Validity period (profile.setting.ldap.otf.validity) LDAP Search Timeout (profile.setting.ldap.search.timeout)