Boot Settings (Turrets)

1.Open XMA settings group

2.Setup options:

Enable 802.1 P/Q

802.1 P/Q Priority

802.1 P/Q VLAN Tagging

3.Press Update button in order to validate changes

4.Reboot impacted turrets in order to apply changes

1.Open XMA2 settings group

2.Setup options:

Enable 802.1 P/Q

Enable 802.1 P/Q on network DATA port

802.1 P/Q Priority

802.1 P/Q Priority on network DATA port

802.1 P/Q VLAN Tagging

802.1 P/Q VLAN Tagging on network DATA port

3.Press Update button in order to validate changes

4.Reboot impacted turrets in order to apply changes

Attention point

when the customer network is not properly setup to handle 802.1 P/Q and XMA2 is tagged with 802.1 P/Q, then XMA2 is not reachable from the turret.

Then, the only way to remove the 802.1 P/Q configuration of the XMA2 is do a reset factory of the XMA2 board.