System information (sysinfo)

 		Top  Previous  Next
IT&Operations > System Monitoring > SNMP > Available data on TPO

System information module contains general information about TPO configuration and state.

System information OID is: .iptrade.TPO.sysinfo (.30191.2.1)

 

totalMemory (.30191.2.1.1)

Contains total memory available on the TPO server in KB

•SNMP syntax: Integer32

•type: punctual

•update rate: set once on system start, never updated

 

usedMemory (.30191.2.1.2)

Contains used memory on the TPO server in KB

•SNMP syntax: Integer32

•type: continuous

•update rate: 10000 ms (default) can be set using the following configuration keys:

application.global.snmp.usedMemory.updatedelay

application.global.snmp.1.3.6.1.4.1.30191.2.1.2.updatedelay

 

freeMemory (.30191.2.1.3)

Contains free memory on the TPO server in KB

•SNMP syntax: Integer32

•type: continuous

•update rate: 10000 ms (default) can be set using the following configuration keys:

application.global.snmp.freeMemory.updatedelay

application.global.snmp.1.3.6.1.4.1.30191.2.1.3.updatedelay

 

diskFreeSpace (.30191.2.1.4)

Contains free space in MB of the disk TPO is running on

•SNMP syntax: Integer32

•type: continuous

•update rate: 10000 ms (default) can be set using the following configuration keys:

application.global.snmp.diskFreeSpace.updatedelay

application.global.snmp.1.3.6.1.4.1.30191.2.1.4.updatedelay

 

sysUpTime (.30191.2.1.5)

Contains elapsed time since last application start

•SNMP syntax: DateAndTime

•type: continuous

•update rate: 1000 ms can be set using the following configuration keys:

application.global.snmp.sysUpTime.updatedelay

application.global.snmp.1.3.6.1.4.1.30191.2.1.5.updatedelay

 

swVersion (.30191.2.1.6)

Contains software version formatted as “X.X.X.X”

•SNMP syntax: DisplayString

•type: punctual

•update rate: set once on system start, never updated

 

ipAddrTable (.30191.2.1.7)

Contains TPO IP addresses.

•SNMP syntax: table ( SEQUENCE OF … )

•table entry: ipAddrEntry (.30191.2.1.7.1)

•table fields: ipAddrIndex, ipAddr (see description hereafter)

•table row ids: from 1 to X where ‘X’ is the number of IP addresses

•type: punctual

•update rate: filled once on system start, never updated

 

ipAddrIndex (.30191.2.1.7.1.1)

Contains IP address index (inside TPO IP address table)

•SNMP syntax: Integer32

•Table row are indexed from 1 to X where ‘X’ is the number of IP addresses

 

ipAddr (.30191.2.1.7.1.2)

Contains IP address (inside TPO IP address table)

•SNMP syntax: IpAddress

 

gatewayAddr (.30191.2.1.8)

Contains TPO gateway address

•SNMP syntax: IpAddress

•type: punctual

•update rate: set once on system start, never updated

 

dnsAddrTable (.30191.2.1.9)

Contains TPO DNS addresses

•SNMP syntax: table ( SEQUENCE OF … )

•table entry: dnsAddrEntry (.30191.2.1.9.1)

•table fields: dnsAddrIndex, dnsAddr (see description hereafter)

•table row ids: from 1 to X where ‘X’ is the number of DNS addresses

•type: punctual

•update rate: filled once on system start, never updated

 

dnsAddrIndex (.30191.2.1.9.1.1)

Contains DNS address index (inside TPO DNS address table)

•SNMP syntax: Integer32

•Table row are indexed from 1 to X where ‘X’ is the number of DNS addresses

 

dnsAddr (.30191.2.1.9.1.2)

Contains DNS address (inside TPO DNS address table)

•SNMP syntax: IpAddress

 

dhcp (.30191.2.1.10)

Specify if DHCP is enabled or not.

•SNMP syntax: INTEGER ( 0 = false, 1 = true )

•type: punctual

•update rate: set once on system start, never updated

 

dhcpServer (.30191.2.1.11)

Specify DHCP server address if DHCP is enabled, otherwise meaningless (set to 0.0.0.0).

•SNMP syntax: IpAddress

•type: punctual

•update rate: set once on system start, never updated

 

macAddr (.30191.2.1.12)

Contains TPO MAC address

•SNMP syntax: PhysAddress

•type: punctual

•update rate: set once on system start, never updated

 

sentNIC (.30191.2.1.13)

Number of datagram sent through NIC since device power up

•SNMP syntax: Integer32

•type: continuous

•update rate: 10000 ms (default) can be set using the following configuration keys:

application.global.snmp.sentNIC.updatedelay

application.global.snmp.1.3.6.1.4.1.30191.2.1.13.updatedelay

 

recvNIC (.30191.2.1.14)

Number of datagram received through NIC since device power up

•SNMP syntax: Integer32

•type: continuous

•update rate: 10000 ms (default) can be set using the following configuration keys:

application.global.snmp.recvNIC.updatedelay

application.global.snmp.1.3.6.1.4.1.30191.2.1.14.updatedelay

 

clusterGroupId (.30191.2.1.15)

Contains group ID the TPO is currently running

•SNMP syntax: Integer32

•type: punctual

•update rate: set as soon a TPO become active, at system start-up if TPO is configured as Active in the cluster, or when a passive TPO become active and starts running a group ID configuration after another Active TPO has stopped working

 

certificateTable (.30191.2.1.16)

Contains the list of certificates on the TPO

•SNMP syntax: table ( SEQUENCE OF … )

•table entry: certificateEntry (.30191.2.1.16.1)

•table fields: certificateIndex, certificateType, certificateValidity, certificateSubject, certificateIssuer, certificateVersion, certificateNotBefore, certificateNotAfter, certificateSN, certificateDomain (see description hereafter)

•table row ids: from 1 to X where ‘X’ is the number of certificates

•type: punctual

•update rate: filled once on system start, updated hourly

 

certificateIndex (.30191.2.1.16.1.1)

Contains Certificate index (inside TPO certificate table)

•SNMP syntax: Integer32

•Table row are indexed from 1 to X where ‘X’ is the number of certificates

 

certificateType (.30191.2.1.16.1.2)

Contains certificate type

•SNMP syntax: DisplayString

 

certificateValidity (.30191.2.1.16.1.3)

Contains remaining certificate validity in days

•SNMP syntax: Integer32

 

certificateSubject (.30191.2.1.16.1.4)

Contains certificate Subject

•SNMP syntax: DisplayString

 

certificateIssuer (.30191.2.1.16.1.5)

Contains certificate Issuer

•SNMP syntax: DisplayString

 

certificateVersion (.30191.2.1.16.1.6)

Contains certificate Version

•SNMP syntax: Integer32

 

certificateNotBefore (.30191.2.1.16.1.7)

Contains certificate validity start date

•SNMP syntax: DisplayString

 

certificateNotAfter (.30191.2.1.16.1.8)

Contains certificate validity end date

•SNMP syntax: DisplayString

 

certificateSN (.30191.2.1.16.1.9)

Contains certificate Serial Number

•SNMP syntax: DisplayString

 

certificateDomain (.30191.2.1.16.1.10)

Contains domain name for which the certificate was issued

•SNMP syntax: DisplayString

 

certificateCount (.30191.2.1.17)

Contains the number of certificates in certificateTable

•SNMP syntax: Integer32

•type: punctual

•update rate: set once on system start, updated hourly