Call control (callcontrol)

IT&Operations > System Monitoring > SNMP > Available data on TPO

Call control module contains information about call server configuration and connectivity, and TPO call resources usage.

Call control OID is: .iptrade.TPO.callcontrol (.30191.2.2)

cmType (.30191.2.2.1)

Contains TPO configured call server type

•SNMP syntax: DisplayString, always “Generic” in version 1.7

•type: punctual

•update rate: set once on system start, never updated

sipDomain (.30191.2.2.2)

Contains TPO configured SIP domain

•SNMP syntax: DisplayString

•type: punctual

•update rate: set once on system start, never updated

loadedCodecs (.30191.2.2.3)

Contains list of loaded codecs

•SNMP syntax: DisplayString

•type: punctual

•update rate: set once on system start, never updated

regNumber (.30191.2.2.4)

Contains the number of entries in regTable (see here after)

•SNMP syntax: Integer32

•type: punctual

•update rate: Initialized at system start, never updated

regTable (.30191.2.2.5)

Contains TPO lines registration status

•SNMP syntax: table ( SEQUENCE OF … )

•table entry: regEntry (.30191.2.2.5.1)

•table fields: regIndex, regPlace, regPlaceMode, regExtension, regAddr, regMaster, regStatus (see description hereafter)

•table row ids: from 1 to X where ‘X’ is the number of line registration

•type: punctual

•update rate: filled at system start:

oNumber of rows in table depends on call server and line configuration.

oOne row is created for each possible combination “call server address”/”line extension”. On system start status is initialized at 0 (means no registration attempt has been done). So if two call servers an 15 line extensions are configured, line registration table contains 30 rows (2 servers X 15 extensions)

oOn registration status update corresponding line is updated

regIndex (.30191.2.2.5.1.1)

Contains line registration index (inside TPO line registration table)

•SNMP syntax: Integer32

•Table row are indexed from 1 to X where ‘X’ is the number of line registration

regPlace (.30191.2.2.5.1.2)

Contains associated line place name (inside TPO line registration table)

•SNMP syntax: DisplayString

regPlaceMode (.30191.2.2.5.1.3)

Contains associated line place mode (inside TPO line registration table)

•SNMP syntax: INTEGER

•Possible values: other(-1), permanent(0), onDemand(1), staticIP(2), ringdown(3), intercom(4), mrdPermanent(5), mrd(6), openCall(7), remoteCall(8), hunt(9), dynamicRingdown(10), joinShared(11), joinAlways(12), joinBuitIn(13), parking(14), oneToMany(15), monitor(16), multicastSlot(17), broadcast(18), mobiletrader(19), slotbridge(20), replay(21), lookup(22), interplace(23)

regExtension (.30191.2.2.5.1.4)

Contains line extension (inside TPO line registration table)

•SNMP syntax: DisplayString

regAddr (.30191.2.2.5.1.5)

Contains call server address (inside TPO line registration table)

•SNMP syntax: DisplayString

regMaster (.30191.2.2.5.1.6)

Contains call server master flag (inside TPO line registration table)

•SNMP syntax: INTEGER

•Possible values: false(0) or true(1)

regStatus (.30191.2.2.5.1.7)

Contains line registration status (inside TPO line registration table)

•SNMP syntax: Integer32

•Possible values:

o0: registration has not been attempted yet

o-1: call server unreachable

oAny SIP status code: 200 means registration success, for other value see call server documentation

ownerCallCount (.30191.2.2.6)

Contains the number of open call owner calls which are present in call control layer

•SNMP syntax: Gauge32

•type: continuous

•update rate: 10000 ms (default) can be set using the following configuration keys:

application.global.snmp.ownerCallCount.updatedelay

application.global.snmp.1.3.6.1.4.1.30191.2.2.6.updatedelay

joinerCallCount (.30191.2.2.7)

Contains the number of open call joiner calls which are present in call control layer

•SNMP syntax: Gauge32

•type: continuous

•update rate: 10000 ms (default) can be set using the following configuration keys:

application.global.snmp.joinerCallCount.updatedelay

application.global.snmp.1.3.6.1.4.1.30191.2.2.7.updatedelay

activeConfCount (.30191.2.2.8)

Contains the number of active conferences which are present in call control layer, that includes place conference and open call conference (equals to places count + open call owner calls count)

•SNMP syntax: Gauge32

•type: continuous

•update rate: 10000 ms (default) can be set using the following configuration keys:

application.global.snmp.activeConfCount.updatedelay

application.global.snmp.1.3.6.1.4.1.30191.2.2.8.updatedelay

placeTable (.30191.2.2.9)

Contains TPO lines usage status

•SNMP syntax: table ( SEQUENCE OF … )

•table entry: placeEntry (.30191.2.2.9.1)

•table fields: placeIndex, placeName, placeMode, placeMaster, placeTraders (see description hereafter)

•table row ids: from 1 to X where ‘X’ is the number of configured places

•type: punctual

•update rate: filled at system start:

oNumber of rows in table depends on places configuration. Equals to number of configured places

oOn call establishment and call termination associated row is updated

placeIndex (.30191.2.2.9.1.1)

Contains place index (inside TPO places table)

•SNMP syntax: Integer32

•Table row are indexed from 1 to X where ‘X’ is the number of configured places

placeName (.30191.2.2.9.1.2)

Contains associated place name (inside TPO places table)

•SNMP syntax: DisplayString

placeMode (.30191.2.2.9.1.3)

Contains associated place mode (inside TPO places table)

•SNMP syntax: INTEGER

placeMaster (.30191.2.2.9.1.4)

Contains place master call connection status (inside TPO places table)

•SNMP syntax: INTEGER

•Possible values:

ofalse(0): no master call is established

otrue(1): a master call is established

placeTraders (.30191.2.2.9.1.5)

Contains number of connected traders (with a call) on the associated place (inside TPO places table)

•SNMP syntax: Gauge32

placeSubscribers (.30191.2.2.9.1.6)

Contains number of traders that have subscribed to the place notification (DDI Only)

•SNMP syntax: Integer32

A trap is associated to this SNMP variable: placeNoSubscribers (.30191.2.2.512.4)

jitBufSize (.30191.2.2.10)

Configured jittering buffer size expressed in milliseconds

•SNMP syntax: Gauge

•type: punctual

•update rate: set once on system start, never updated

inMMChannelCount (.30191.2.2.11)

Number of incoming channels currently used

•SNMP syntax: Gauge

•type: continuous

•update rate: 10000 ms (default) can be set using the following configuration keys:

application.global.snmp.inMMChannelCount.updatedelay

application.global.snmp.1.3.6.1.4.1.30191.2.2.11.updatedelay

outMMChannelCount (.30191.2.2.12)

Number of outgoing channels currently used

•SNMP syntax: Gauge

•type: continuous

•update rate: 10000 ms (default) can be set using the following configuration keys:

application.global.snmp.outMMChannelCount.updatedelay

application.global.snmp.1.3.6.1.4.1.30191.2.2.12.updatedelay

parkReservedSlotCount (.30191.2.2.13)

Contains number of reserved parking slots

•SNMP syntax: Gauge

•type: continuous

•update rate: 10000 ms (default) can be set using the following configuration keys:

application.global.snmp.parkReservedSlotCount.updatedelay

application.global.snmp.1.3.6.1.4.1.30191.2.2.13.updatedelay

parkBusySlotCount (.30191.2.2.14)

Contains number of busy parking slots

•SNMP syntax: Gauge

•type: continuous

•update rate: 10000 ms (default) can be set using the following configuration keys:

application.global.snmp.parkBusySlotCount.updatedelay

application.global.snmp.1.3.6.1.4.1.30191.2.2.14.updatedelay

parkFreeSlotCount (.30191.2.2.15)

Contains number of free parking slots

•SNMP syntax: Gauge

•type: punctual

•update rate: set once on system start, never updated

placeNumber (.30191.2.2.16)

Contains the number of entries in placeTable (see here before)

•SNMP syntax: INTEGER

•type: punctual

•update rate: Initialized at system start, never updated

pladNumber (.30191.2.2.17)

Contains the number of entries in pladLineTable (see here after)

•SNMP syntax: INTEGER

•type: punctual

•update rate: Initialized at system start, never updated

pladLineTable (.30191.2.2.18)

Contains PLAD lines entries

•SNMP syntax: table ( SEQUENCE OF … )

•table entry: pladLineEntry (.30191.2.2.18.1)

•table fields: pladLineIndex, pladLinePlaceName, pladLinePladLine, pladLinePladName, pladLineActive, pladLineProxyAddr, pladLineConnected, pladLineLastStatus (see description hereafter)

•table row ids: from 1 to X where ‘X’ is the number of PLAD lines

•type: punctual

•update rate: filled at system start:

oNumber of rows in table depends on PLAD lines configuration. Equals to number of configured PLAD lines

oOn PLAD state update associated row is updated

pladLineIndex (.30191.2.2.18.1.1)

Contains PLAD lines index (inside PLAD lines table)

•SNMP syntax: INTEGER

•Table row are indexed from 1 to X where ‘X’ is the number of configured PLAD lines

pladLinePlaceName (.30191.2.2.18.1.2)

Contains PLAD Line place name

•SNMP syntax: DisplayString

pladLinePladLine (.30191.2.2.18.1.3)

Contains line name as defines in PLAD configuration

•SNMP syntax: DisplayString

pladLinePladName (.30191.2.2.18.1.4)

Contains PLAD group name the place is linked to

•SNMP syntax: DisplayString

pladLineActive (.30191.2.2.18.1.5)

Specify if the corresponding place is started or not

•SNMP syntax: INTEGER

•Possible values: false(0) or true(1)

pladLineProxyAddr (.30191.2.2.18.1.6)

Contains the proxy address and port used to contact the PLAD group

•SNMP syntax: DisplayString

pladLineConnected (.30191.2.2.18.1.7)

Specify if the PLAD group is currently connected on the corresponding proxy address

•SNMP syntax: INTEGER

•Possible values: false(0) or true(1)

pladLineLastStatus (.30191.2.2.18.1.8)

Contains last SIP status received from that PLAD group on that proxy

•SNMP syntax: INTEGER

•Possible values: Numbers present in "Status codes" section

ed137SlotNumber (.30191.2.2.19)

Contains the number of entries in ed137SlotTable (see here after)

•SNMP syntax: INTEGER

•type: punctual

•update rate: filled at system start:

oNumber of rows in table depends on number of ED137 slots configured (permanent DDI Slot with ED137 radiomode enabled).

ed137SlotTable (.30191.2.2.20)

Contains ED137 slots entries

•SNMP syntax: table ( SEQUENCE OF … )

•table entry: ed137SlotEntry (.30191.2.2.20.1)

•table fields: ed137SlotIndex, ed137SlotExtension, ed137AlarmStatus, ed137AlarmTimestamp (see description hereafter)

•table row ids: from 1 to X where ‘X’ is the number of configured ED137 slots

•type: punctual

•update rate: filled at system start:

oNumber of rows in table depends on number of ED137 slots configured (permanent DDI Slot with ED137 radiomode enabled).

ed137SlotIndex (.30191.2.2.20.1.1)

Contains ED137 slots index (inside ED137 slots table)

•SNMP syntax: INTEGER

•Table row are indexed from 1 to X where ‘X’ is the number of configured ED137 slots

ed137SlotExtension (.30191.2.2.20.1.2)

Contains the slot extension

•SNMP syntax: DisplayString

ed137AlarmStatus (.30191.2.2.20.1.3)

Contains the code representing the alarm received by the TPO.

•SNMP syntax: INTEGER

•Possible values:

onoAlarm(0),

otemperature(1),

omainPowerSupply(2),

obackupPowerSupply(3),

otetraEquipmentInscriptionOnBaseStation(4),

otetraV24Link(5),

obackupNetworkLink(6),

omainNetworkLink(7)

ed137AlarmTimestamp (.30191.2.2.20.1.4)

Contains the timestamp when the last alarm has been received by the TPO in form of a string.

The format is : "YYYY-mm-dd HH:MM:SS".

•SNMP syntax: DisplayString

cUnitNumber (.30191.2.2.21)

Contains the number of entries in cUnitTable (see here after)

•SNMP syntax: INTEGER

•type: punctual

•update rate: filled at system start:

oThe number of rows in this table depends of the number of cUnit (8 by default). This number can be set with the key application.tpo.cunit.nbactivecunits.

cUnitTable (.30191.2.2.22)

Contains cUnit information entries

•SNMP syntax: table ( SEQUENCE OF … )

•table entry: cUnitEntry (.30191.2.2.22.1)

•table fields: cUnitIndex, cUnitId, cUnitEstimatedCalls, cUnitUsedConferences, cUnitUsedInStreams, cUnitUsedOutStreams (see description hereafter)

•table row ids: from 1 to X where ‘X’ is the number of cUnit

•type: punctual

oThe number of rows in this table depends of the number of cUnit (8 by default). This number can be set with the key application.tpo.cunit.nbactivecunits.

cUnitIndex (.30191.2.2.22.1.1)

Contains the cUnit index (inside cUnit table)

•SNMP syntax: INTEGER

•Table row are indexed from 1 to X where ‘X’ is the number of configured cUnit

cUnitId (.30191.2.2.22.1.2)

Contains the ID of the cUnit

•SNMP syntax: INTEGER

cUnitEstimatedCalls (.30191.2.2.22.1.3)

Contains the estimated number of calls that a cUnit can handle

•SNMP syntax: INTEGER

cUnitUsedConferences (.30191.2.2.22.1.4)

Contains the number of conferences used in the cUnit

•SNMP syntax: INTEGER

cUnitUsedInStreams (.30191.2.2.22.1.5)

Contains the number of input streams used by the cUnit

•SNMP syntax: INTEGER

cUnitUsedOutStreams (.30191.2.2.22.1.6)

Contains the number of output streams used by the cUnit

•SNMP syntax: INTEGER

rtpTimeoutsNumber (.30191.2.2.23)

Contains the number of entries in rtpTimeoutTable (see here after)

•SNMP syntax: INTEGER

•type: punctual

•update rate: filled at system start:

oThe number of rows in this table depends on the key application.tpo.nbrtptimeout.

rtpTimeoutTable (.30191.2.2.24)

Contains RTP timeout event entries.

•SNMP syntax: table ( SEQUENCE OF … )

•table entry: rtpTimeoutEntry (.30191.2.2.24.1)

•table fields: rtpTimeoutIndex, rtpTimeoutCallID, rtpTimeoutTurretUser, rtpTimeoutTurretHost, rtpTimeoutTimestamp, rtpTimeoutCallType (see description hereafter),

•table row ids: from 1 to X where ‘X’ is application.tpo.nbrtptimeout.

•type: punctual

oThe number of rows in this table depends on the key application.tpo.nbrtptimeout.

rtpTimeoutIndex (.30191.2.2.24.1.1)

Contains the rtpTimeout index. This number is only useful as a short-term reference.

•SNMP syntax: INTEGER

•Table row are indexed from 1 to X where ‘X’ is application.tpo.nbrtptimeout.

rtpTimeoutCallID (.30191.2.2.24.1.2)

Contains the SIP CallID of the mastercall related to this event.

•SNMP syntax: DisplayString

rtpTimeoutTurretUser (.30191.2.2.22.1.3)

Contains the user if the timeout was on a call to turret.

•SNMP syntax: DisplayString

rtpTimeoutTurretHost (.30191.2.2.24.1.4)

Contains the host if the timeout was on a call to turret.

•SNMP syntax: DisplayString

rtpTimeoutTimestamp (.30191.2.2.24.1.5)

Contains the time at which the timeout occurred.

•SNMP syntax: DateAndTime

rtpTimeoutCallType (.30191.2.2.24.1.6)

Contains the type of call (master or Local).

•SNMP syntax: DisplayString