PBX Lines provisioning

Solution Installation > Turret/Console Installation

Before proceeding with the configuration of the IPTrade Device, IT & voice administrators must ensure that the following resources have been provisioned in the PBX configuration.

•PBX SIP domain or alternatively the IP address of the main IPPBX

•at least a SIP extension and the attached information: SIP digest and SIP password

•SIP Proxy addresses

•SIP Display name

Here is what underlined text mean depending on PBX context :

Cisco CUCM (using fetch automatically fullfil the necessary information by retrieving all field from CUCM FTP site except SIP Proxy addresses)

•SIP Display name	CUCM - Device - Phone - <Your phone> -<Your extension> - Alerting Name
•SIP extension	CUCM - Device - Phone - <Your phone> -<Your SIP extension>
•SIP password	CUCM - User Management - End User - <Your User> - Password (or digest credentials if LDAP is used)
•SIP digest	CUCM - User Management - End User - <Your User> - User ID
•SIP domain	CUCM - Publisher IP address
•SIP Proxy addresses	CUCM - Publisher/Subscribers IP addresses list

Avaya ACM

•SIP Display name	<First Name> + <Last Name>
•SIP extension	Your SIP extension
•SIP password	SIP Password
•SIP digest	Your SIP extension
•SIP domain	SES Domain
•SIP Proxy addresses	SES IP address

This information must be either retrieved automatically(Cisco CUCM & fetch) or be configured by IT & Voice administrators on the specific PBX.

Note: In the SIP configuration, always prefer using a domain name for the SIP local domain

See next steps for Cisco CUCM configuration.