Windows 10's Turret

Turret with Windows 10 OS system requires double reboot to setup properly 802.1x because of system protection:

Enable 802.1x

1.The turret must be connected on a network without 802.1x (switch without 802.1x)

2.Setup 802.1x as described in Turret's bootstrap

3.The turret reboots automatically to enter in update mode

4.The turret is in update mode to setup 802.1x configuration. Once done, It reboots automatically in normal mode.

5.The turret is in normal mode and 802.1x is properly configured. It fails to get IP address (because it is in a network without 802.1x)

6.Connect the turret to a network with 802.1x.

Disable 802.1x

1.The turret must be connected on a network with 802.1x (switch with 802.1x)

2.Disable 802.1x as described in Turret's bootstrap

3.The turret reboots automatically to enter in update mode

4.The turret is in update mode to disable 802.1x. Once done, It reboots automatically in normal mode.

5.The turret is in normal mode and 802.1x is properly disabled. It fails to get IP address (because it is in a network with 802.1x)

6.Connect the turret to a network without 802.1x.