Hard Turret & Attendant Console

The 8 bits of DiffServ field are as follow:

        0    1    2    3    4    5    6    7

     +---+---+---+---+---+---+---+---+

     |         DSCP                 |  CU   |

     +---+---+---+---+---+---+---+---+

By Default, the feature is enabled and set value 184 in decimal (10111000 in binary format) for this whole byte.

That means that DSCP field is set to 0x2E (46 in decimal) and CU field is set to 0.

If administrators need to change it, just follow this small procedure

1)Get the DSCP field value from the network infrastructure manager ;

2)Connect to the TSS administration console from your preferred Internet navigator and log onto the system with administration privileges ;

3)From the main menu, navigate to the Device Management | Zones  and click on your zone

4)Go to the Turret Boot Settings panel

5)On the left tab list, select "RTP" options.

6)on the "Selection" area, ensure to choose the right turret firmware version and the file that indicates the range of deployment of this setting.

7)Check for voice call: "QOS – DiffServ" option and type in the Diffserv field value that match your DSCP field desired value; the value has to be entered as a numeric decimal value ;

Location: Terminal Boot Settings, TPO Shared Settings, TPO Private Settings, TPO Boot Settings
RTP	QOS - DiffServ Key: application.mm.qos.diffserv Description: This parameter enables and set the DiffServ value. The 8 bits of DiffServ field are as follow: 0 1 2 3 4 5 6 7 +---+---+---+---+---+---+---+---+ | DSCP | CU | +---+---+---+---+---+---+---+---+ By Default, the feature is enabled and set value 160(101000)for this whole byte. That means that DSCP field is set to 0x28(40 in decimal) and gives a value of CS5 The default value aligns with RFC 4594 https://datatracker.ietf.org/doc/html/rfc4594 ------------------------------------------------------- | Service | DSCP | DSCP | Application | | Class Name | Name | Value | Examples | |===============+=========+=============+| | Signaling | CS5 | 101000 | IP Telephony signaling | |---------------+---------+-------------+------------| The value of the key could be manually set by the Administrator or given by LLDP-MED. Notice LLDP-MED has higher priority than manual action. Related settings: video call QOS - DiffServ (application.mm.video.diffserv) QoS configuration (netrix.settings.qos) QOS RTP - DiffServ (application.mm.qos.rtp.diffserv)

8)Check for video call: "video call QOS - DiffServ" option and type in the Diffserv field value that match your DSCP field desired value; the value has to be entered as a numeric decimal value ;

Location: Terminal Boot Settings
RTP	video call QOS - DiffServ Key: application.mm.video.diffserv Description: This parameter enables and set the DiffServ value for video call. If the key is not set, the DiffServ value is given by application.mm.qos.diffserv. The value of the key could be manually set by the Administrator or given by LLDP-MED. Notice LLDP-MED has higher priority than manual action for the key application.mm.qos.diffserv. The 8 bits of DiffServ field are as follow: 0 1 2 3 4 5 6 7 +---+---+---+---+---+---+---+---+ | DSCP | CU | +---+---+---+---+---+---+---+---+ Example: value 184(10111000) for this whole byte. That means that DSCP field is set to 0x2E (46 in decimal) Related settings: QOS - DiffServ (application.mm.qos.diffserv)

9)Press Update button to commit changes;

10)Turrets have to be rebooted in order to apply changes ;

Notes

•Only the VoIP traffic, including signaling (SIP) and real-time voice data (RTP), is tagged using the value specified in the option above ;

•Setting the option value to -1 deactivates DSCP field tagging ;

•Boostrap version 3.3.11333 or higher is required.