System information module contains traps referring to general information about turret state.
System information trap “folder” OID is: .iptrade.turret.sysinfo.sysInfoTraps (.30191.1.1.0)
fdLowSpace (.30191.1.1.0.1)
Launched when flash disk free space gets down under a preconfigured value
•Associated SNMP variable: .sysinfo.fdFreeSpace (.30191.1.1.4) •Limit value (minimum): 20 MB can be set using the following configuration:
| Location: Terminal Boot Settings, TPO Boot Settings, SNMP, SNMP |
 |
|
|
•Check rate: 300000 ms (default) can be set using the following configuration keys: application.global.snmp.trap.fdLowSpace.checkdelay
application.global.snmp.1.3.6.1.4.1.30191.1.1.512.1.updatedelay
•Additionally, applicative layer force a check of this trap after each user login as required in the SNMP relative SRD. •Additional associated SNMP variables which populate the trap PDU: o.sysinfo.fdFreeSpace (.30191.1.1.4) o.sysinfo.connectedUser (.30191.1.1.23)
lowMemory (.30191.1.1.0.2)
Launched when physical free memory gets down under a preconfigured value
•Associated SNMP variable: .sysinfo.freeMemory (.30191.1.1.3) •Limit value (minimum): 1024 KB can be set using the following configuration:
| Location: Terminal Boot Settings, TPO Boot Settings, SNMP |
 |
|
|
•Check rate: 300000 ms (default) can be set using the following configuration keys: application.global.snmp.trap.lowMemory.checkdelay
application.global.snmp.1.3.6.1.4.1.30191.1.1.512.2.updatedelay
•Additional associated SNMP variables which populate the trap PDU: o.sysinfo.totalMemory (.30191.1.1.1) o.sysinfo.freeMemory (.30191.1.1.3) o.sysinfo.connectedUser (.30191.1.1.23)
highTemperature (.30191.1.1.0.3)
Launched when temperature gets above a preconfigured value
•Associated SNMP variables: o.sysinfo.cpuTempTable.cpuTemp (.30191.1.1.25.1.2) o.sysinfo.motherboardTempTable.motherboardTemp (.30191.1.1.26.1.2) •Limit value (maximum): 75 °C can be set using the following configuration:
| Location: Terminal Boot Settings |
 |
|
|
•Check rate: 3000 ms cannot be configured
dspInputChannel (.30191.1.1.0.4)
Launched when applicative layer is not able to acquire input channel from DSP
•Associated SNMP variable: none (applicative layer managed trap) •Check rate: none (applicative layer managed trap) •Additional associated SNMP variables which populate the trap PDU: none
dspOutputChannel (.30191.1.1.0.5)
Launched when applicative layer is not able to acquire output channel from DSP
•Associated SNMP variable: none (applicative layer managed trap) •Check rate: none (applicative layer managed trap) •Additional associated SNMP variables which populate the trap PDU: none |