Recorder server (recorder)

Recorder server module contains information about recorder server configuration and connectivity.

Recorder server OID is: .iptrade.TPO.recorder (.30191.2.6)

recNumber (.30191.2.6.1)

Contains the number of entries in recTable (see here after)

•SNMP syntax: Integer32

•type: punctual

•update rate: set once on system start, never updated

recTable (.30191.2.6.2)

Contains recorder entries

•SNMP syntax: table ( SEQUENCE OF … )

•table entry: recEntry (.30191.2.6.2.1)

•table fields: recIndex, recAddr (see description hereafter)

•table row ids: from 1 to X where ‘X’ is the number of recorders

•type: punctual

•update rate: filled at system start

recIndex (.30191.2.6.2.1.1)

Contains recorder entries index (inside recorder table)

•SNMP syntax: Integer32

•Table row are indexed from 1 to X where ‘X’ is the number of recorders

recAddr (.30191.2.6.2.1.2)

Contains recorder ip address (inside recorder table)

•SNMP syntax: DisplayString

recNodeStatus (.30191.2.6.2.1.3)

Contains connectivity status for each recorder

•SNMP syntax: INTEGER

•Possible values:

➢down(0): connection or recording error                

➢up(1): connection and recording up

➢not_connected (2)

•type: punctual

•update rate: updated on status change

recStatus (.30191.2.6.3)

Contains recorder status: down (0) or up (1). If recNumber equals 0 recorder is not used (2)

•SNMP syntax: INTEGER

•Possible values: error(0), clean(1) or not_connected(2)

•type: punctual

•update rate: set once on system start, never updated