System information (sysinfo)

 		Top  Previous  Next
IT&Operations > System Monitoring > SNMP > Available data on Turret

System information module contains general information about turret configuration and turret state.

System information OID is: .iptrade.turret.sysinfo (.30191.1.1)

 

totalMemory (.30191.1.1.1)

Contains total memory available on the turret in KB

•SNMP syntax: Integer32

•type: punctual

•update rate: set once on system start, never updated

 

usedMemory (.30191.1.1.2)

Contains used memory on the turret in KB

•SNMP syntax: Integer32

•type: continuous

•update rate: 10000 ms (default) can be set using the following configuration keys:

application.global.snmp.usedMemory.updatedelay

application.global.snmp.1.3.6.1.4.1.30191.1.1.2.updatedelay

 

freeMemory (.30191.1.1.3)

Contains free memory on the turret in KB

•SNMP syntax: Integer32

•type: continuous

•update rate: 10000 ms (default) can be set using the following configuration keys:

application.global.snmp.polling.timer

application.global.snmp.freeMemory.updatedelay

application.global.snmp.1.3.6.1.4.1.30191.1.1.3.updatedelay

 

standbyMemory (.30191.1.1.29.0)

Contains standby memory on the turret server in KB

•SNMP syntax: Integer32

•type: continuous

•update rate: 5000 ms (default) can be set using the following configuration keys:

application.global.snmp.polling.timer

 

fdFreeSpace (.30191.1.1.4)

Contains free space on the turret flash card in MB

•SNMP syntax: Integer32

•type: continuous

•update rate: 10000 ms (default) can be set using the following configuration keys:

application.global.snmp.fdFreeSpace.updatedelay

application.global.snmp.1.3.6.1.4.1.30191.1.1.4.updatedelay

 

sysUpTime (.30191.1.1.5)

Contains elapsed time since last system start

•SNMP syntax: DateAndTime

•type: continuous

•update rate: 1000 ms can be set using the following configuration keys:

application.global.snmp.sysUpTime.updatedelay

application.global.snmp.1.3.6.1.4.1.30191.1.1.5.updatedelay

 

serialNumber (.30191.1.1.6)

Contains turret serial number

•SNMP syntax: DisplayString

•type: punctual

•update rate: set once on system start, never updated

onBoardTemperature (.30191.1.1.7)

Contains turret on board temperature in °C This variable is OBSLETE

This temperature is replaced by cpuTempTable and motherboardTempTable

•SNMP syntax: Integer32

 

fdReadOnly (.30191.1.1.8)

Contains flash card protection hardware button state

•SNMP syntax: Boolean ( 0 = false, 1 = true )

•type: punctual

•update rate: set once on system start, never updated

 

osImageVersion (.30191.1.1.9)

Contains operating image version formatted as “IPTXX” where XX is the version number

•SNMP syntax: DisplayString

•type: punctual

•update rate: set once on system start, never updated

 

bsVersion (.30191.1.1.10)

Contains bootstrap version formatted as “rcX.X (build:XXXX)”

•SNMP syntax: DisplayString

•type: punctual

•update rate: set once on system start, never updated

 

swVersion (.30191.1.1.11)

Contains software version formatted as “rcX.X (build:XXXX)”

•SNMP syntax: DisplayString

•type: punctual

•update rate: set once on system start, never updated

 

turretModel (.30191.1.1.12)

Contains turret model which is one of the following values: “Profile@K”, “ProfileIK”, “ProfileSK” or “ProfileEK”

•SNMP syntax: DisplayString

•type: punctual

•update rate: set once on system start, never updated

 

turretState (.30191.1.1.13)

Contains turret current state: “Run using bank 1” or “Run using bank 2”

•SNMP syntax: DisplayString

•type: punctual

•update rate: set once on system start, never updated

 

ipAddrTable (.30191.1.1.14)

Contains turret IP addresses.

•SNMP syntax: table ( SEQUENCE OF … )

•table entry: ipAddrEntry (.30191.1.1.14.1)

•table fields: ipAddrIndex, ipAddr (see description hereafter)

•table row ids: from 1 to X where ‘X’ is the number of IP addresses

•type: punctual

•update rate: filled once on system start, never updated

 

ipAddrIndex (.30191.1.1.14.1.1)

Contains IP address index (inside turret IP address table)

•SNMP syntax: Integer32

•Table row are indexed from 1 to X where ‘X’ is the number of IP addresses

 

ipAddr (.30191.1.1.14.1.2)

Contains IP address (inside turret IP address table)

•SNMP syntax: IpAddress

 

gatewayAddr (.30191.1.1.15)

Contains turret gateway address

•SNMP syntax: IpAddress

•type: punctual

•update rate: set once on system start, never updated

 

dnsAddrTable (.30191.1.1.16)

Contains turret DNS addresses.

•SNMP syntax: table ( SEQUENCE OF … )

•table entry: dnsAddrEntry (.30191.1.1.14.1)

•table fields: dnsAddrIndex, dnsAddr (see description hereafter)

•table row ids: from 1 to X where ‘X’ is the number of DNS addresses

•type: punctual

•update rate: filled once on system start, never updated

 

dnsAddrIndex (.30191.1.1.16.1.1)

Contains DNS address index (inside turret DNS address table)

•SNMP syntax: Integer32

•Table row are indexed from 1 to X where ‘X’ is the number of DNS addresses

 

dnsAddr (.30191.1.1.16.1.2)

Contains DNS address (inside turret DNS address table)

•SNMP syntax: IpAddress

 

dhcp (.30191.1.1.17)

Specify if DHCP is enabled or not.

•SNMP syntax: INTEGER ( 0 = false, 1 = true )

•type: punctual

•update rate: set once on system start, never updated

 

dhcpAddr (.30191.1.1.18)

Specify DHCP server address if DHCP is enabled, otherwise meaningless (set to 0.0.0.0).

•SNMP syntax: IpAddress

•type: punctual

•update rate: set once on system start, never updated

 

macAddr (.30191.1.1.19)

Contains turret MAC address

•SNMP syntax: PhysAddress

•type: punctual

•update rate: set once on system start, never updated

 

sentNIC (.30191.1.1.20)

Number of datagram sent through NIC since device power up

•SNMP syntax: Integer32

•type: continuous

•update rate: 10000 ms (default) can be set using the following configuration keys:

application.global.snmp.sentNIC.updatedelay

application.global.snmp.1.3.6.1.4.1.30191.1.1.19.updatedelay

 

recvNIC (.30191.1.1.21)

Number of datagram received through NIC since device power up

•SNMP syntax: Integer32

•type: continuous

•update rate: 10000 ms (default) can be set using the following configuration keys:

application.global.snmp.recvNIC.updatedelay

application.global.snmp.1.3.6.1.4.1.30191.1.1.20.updatedelay

 

terminalId (.30191.1.1.22)

Contains turret terminal ID

•SNMP syntax: DisplayString

•type: punctual

•update rate: set once on system start, never updated

 

connectedUser (.30191.1.1.23)

Contains turret connected authenticated user

•SNMP syntax: DisplayString formatted as “<User > : <Ext>” where <User> is the user primary extension SIP display name as defined in TSS user settings and <Ext> is user primary extension as defined in TSS user settings

•type: punctual

•update rate: set once on system start, never updated

•Remarks: When turret is on login screen or in anonymous mode the value of connected user is “None”

 

fansSpeedTable (.30191.1.1.24)

Contains turret fans speed.

•SNMP syntax: table ( SEQUENCE OF … )

•table entry: fansSpeedEntry (.30191.1.1.24.1)

•table fields: fansSpeedIndex, fansSpeedAddr (see description hereafter)

•table row ids: from 1 to X where ‘X’ is the number of fans

•type: punctual

•update rate: each 3 seconds if Hardware Health Monitoring is enabled (Turret Boot Setting: application.global.hm.enable)

 

fansSpeedIndex (.30191.1.1.24.1.1)

Contains fans speed index (inside turret fans speed table)

•SNMP syntax: Integer32

•Table row are indexed from 1 to X where ‘X’ is the number of fans

 

fansSpeed (.30191.1.1.24.1.2)

Contains fans speed (inside turret fans speed table)

•SNMP syntax: Integer32

 

cpuTempTable (.30191.1.1.25)

Contains turret CPU temperatures.

•SNMP syntax: table ( SEQUENCE OF … )

•table entry: cpuTempEntry (.30191.1.1.25.1)

•table fields: cpuTempIndex, cpuTempAddr (see description hereafter)

•table row ids: from 1 to X where ‘X’ is the number of CPU thermometer

•type: punctual

•update rate: each 3 seconds if Hardware Health Monitoring is enabled (Turret Boot Setting: application.global.hm.enable)

 

cpuTempIndex (.30191.1.1.25.1.1)

Contains CPU temperatures index (inside turret CPU temperatures table)

•SNMP syntax: Integer32

•Table row are indexed from 1 to X where ‘X’ is the number of CPU thermometer

 

cpuTemp (.30191.1.1.25.1.2)

Contains CPU temperatures (inside turret CPU temperatures table)

•SNMP syntax: Integer32

 

motherboardTempTable (.30191.1.1.26)

Contains turret motherboard temperatures.

•SNMP syntax: table ( SEQUENCE OF … )

•table entry: mbTempEntry (.30191.1.1.26.1)

•table fields: mbTempIndex, mbTempAddr (see description hereafter)

•table row ids: from 1 to X where ‘X’ is the number of motherboard thermometer

•type: punctual

•update rate: each 3 seconds if Hardware Health Monitoring is enabled (Turret Boot Setting: application.global.hm.enable)

 

motherboardTempIndex (.30191.1.1.26.1.1)

Contains motherboard temperatures index (inside turret motherboard temperatures table)

•SNMP syntax: Integer32

•Table row are indexed from 1 to X where ‘X’ is the number of motherboard thermometer

 

motherboardTemp (.30191.1.1.26.1.2)

Contains motherboard temperatures (inside turret motherboard temperatures table)

•SNMP syntax: Integer32

 

cpuLoadTable (.30191.1.1.27)

Contains turret CPU usage.

•SNMP syntax: table ( SEQUENCE OF … )

•table entry: cpuLoadEntry (.30191.1.1.27.1)

•table fields: cpuLoadIndex, cpuLoadAddr (see description hereafter)

•table row ids: from 1 to X where ‘X’ is the number of CPU

•type: punctual

•update rate: each 3 seconds if Hardware Health Monitoring is enabled (Turret Boot Setting: application.global.hm.enable)

 

cpuLoadIndex (.30191.1.1.27.1.1)

Contains CPU usage index (inside turret CPU usage table)

•SNMP syntax: Integer32

•Table row are indexed from 1 to X where ‘X’ is the number of CPU

 

cpuLoad (.30191.1.1.27.1.2)

Contains CPU usage (inside turret CPU usage table)

•SNMP syntax: Integer32

 

otherTempTable (.30191.1.1.28)

Contains a list of other device temperature (HDD and ACPI temperatures)

•SNMP syntax: table ( SEQUENCE OF … )

•table entry: otherTempEntry (.30191.1.1.28.1)

•table fields: otherTempIndex, otherTemp,  otherTempType (see description hereafter)

•table row ids: from 1 to X where ‘X’ is the number of other device temperatures

•type: punctual

•update rate: each 3 seconds if Hardware Health Monitoring is enabled (Turret Boot Setting: application.global.hm.enable)

 

otherTempIndex (.30191.1.1.28.1.1)

Contains other device temperature index

•SNMP syntax: Integer32

•Table row are indexed from 1 to X where ‘X’ is the number of other device temperature

 

otherTemp (.30191.1.1.28.1.2)

Contains other device temperature (HDD and ACPI temperatures)

•SNMP syntax: Integer32

 

otherTempType (.30191.1.1.28.1.3)

Contains other device type

•SNMP syntax: Integer32